Metallic Pineapple Tote Bag for Pineapple Day!

This post may contain affiliate links, sponsored content and products received at no cost.

6:00 AM

I received supplies from Cricut and Oriental Trading in exchange for this post.

Affiliate links included.

Happy Pineapple Day!
Seriously, June 27th is Pineapple day, so why not celebrate! My daughter is totally into pineapples these days, so the more we can DIY, the better! Make a darling metallic Pineapple polka dot tote!

You will need:

Metallic Green Iron on

Metallic Gold Iron on

Tote Bag

Fabric for lining

Webbing for straps

and the

Cricut Explore Air™ 2 machine

I did a pineapple polka dot shirt back in May, it's the same technique for this tote bag.
All the Cricut Design Space info and the FREE png files for the pineapple are on that post.
Lay the iron on vinyl metallic side down on the mat. Mirror the image for cutting.

Cut the pineapple bodies in gold.
Peel off the excess gold iron on.

I made this one big sheet of pineapples, so I didn't have to spread out the pineapples by hand like I did on the shirt. It wastes more vinyl but was easier in some respects. You pick.

Place the iron on with the plastic side up on the tote.

Cover with a tea towel and press that iron on each pineapple for about a minute.

Get those tiny detailed edges with the tip of the iron.

Peel back the plastic when it is cool.

Cut the green tops and cut them apart. Place where they should go on the pineapple bodies.
Cover with the tea towel and iron. Do not iron right on the metallic foil!

Peel off the plastic and enjoy the shine!
I love the metallic foil!

I decided to change out the straps and line my bag for strength.
These tote bags are my favorite to make over.
If you need some more directions on lining a bag, check out this past post here.

I used a black and white houndstooth I had in my stash.
I cut it slightly larger than the tote bag and sewed down each side. I did a corner tuck on the bottom corners to fit in the tote snugly.