Felix Felicis Resin Necklace DIY!

This post may contain affiliate links, sponsored content and products received at no cost.

6:00 AM

LIQUID LUCK NECKLACE MADE WITH RESIN Make liquid luck to wear around your neck. Are you a fan of Harry Potter like me? I love the books, the movies and all the merch! Use Jewelry Resin to make a Felix Felicis Liquid Luck vial necklace to wear and showcase your true devotion to the Wizarding World.

Felix Felicis Resin Necklace DIY!

Make liquid luck to wear around your neck. Are you a fan of Harry Potter like me? I love the books, the movies and all the merch! Use Jewelry Resin to make a Felix Felicis Liquid Luck vial necklace to wear and showcase your true devotion to the Wizarding World.

SUPPLIES NEEDED FOR LIQUID LUCK:

EnviroTex Jewelry Resin

Mica Powder in Gold

Pipette

Glass Tear-drop Vial

Mixing Cups, Stirring sticks, gloves

Chain, Jump Ring and Jewelry Pliers

STEP 1: MIXING JEWELRY RESIN

Begin by reading the directions for properly mixing resin. Usually if a resin project does not turn out, it’s probably due to mixing improperly.

Pour equal amounts of the resin and the hardener into a cup and stir gently for 2 full minutes. Then pour the resin into a second cup and mix with a second stirring stick for another full minute.

STEP 1: MIXING JEWELRY RESIN Begin by reading the directions for properly mixing resin. Usually if a resin project does not turn out, it’s probably due to mixing improperly. Pour equal amounts of the resin and the hardener into a cup and stir gently for 2 full minutes. Then pour the resin into a second cup and mix with a second stirring stick for another full minute.

STEP 2: MIX IN THE MICA POWDER

After mixing the resin in the full 2 phase process, add a little bit of the gold Mica Powder and gently stir it into the resin.

Stir slowly to avoid adding extra bubbles into the resin.

STEP 3: FILL THE VIAL

Now use the pipette to transfer the gold resin into the tear-drop glass vial.

Squeeze out the pipette slowly to fill the vial without bubbles.

Fill up the glass vial as much as you want, leaving room for the little cork on top.

Set the vial into a piece of pierced cardboard to keep the glass straight up during the drying process. Then let it dry and cure overnight.

STEP 4: ADD THE CHAIN

Once the resin has cured, place the cork back inside the vial. Then use a jump ring to attach the vial to a chain using jewelry pliers.

That’s it! Now you have a necklace that is envious of every member of the quidditch team, every wizard or witch taking their OWLS or any muggle that loves all things Harry Potter! This would make a great handmade gift too.