How to Make Monstera Leaf Stained Glass Sun Catcher

This post may contain affiliate links, sponsored content and products received at no cost.

2:00 AM

How to Make Monstera Leaf Stained Glass Sun Catcher!

Learn how to make a stained glass monstera leaf sun catcher from beginning to end.

Copper foil stained glass is a great way to make a little stained glass hanger for the window without having to commit to an entire window.

Let's make a beautiful stained glass suncatcher with a monstera leaf and then the sky is the limit for new patterns and designs to try.

Stained Glass Tutorial for BEGINNERS!

IS STAINED GLASS CRAFTING AN INVESTMENT?

Usually I post simple projects that don't take a lot of time, skill or money.

This is not one of them.

There is a big learning curve when it comes to cutting stained glass and soldering, it's kind of a hefty investment and it can take years to get really good at it...but you can sell the finished piece or give as heartfelt gifts.

I did a few beautiful suncatchers that are crystals to start. They are an easy shape, cutting only straight lines, and only 6 pieces.

They are fun to do too, if you are just started out, that might be a fun pattern to start with.

I love trying new things and this is something that I felt literally prompted to start doing even though I had no desire in the past.

So here are the things I've learned, things I wish I knew when I started the first time and the basics for anyone wanting to start a new hobby!

Next step, just dive right in!

I love trying new things and this is something that I felt literally prompted to start doing even though I had no desire in the past. So here are the things I've learned, things I wish I knew when I started and the basics for anyone wanting to start a new hobby!

Stained Glass Kit Option!

Before we start, the good news is that there are stained glass kits, that take some of the expense and challenge out of stained glass copper foil sun catchers.

They are pre-cut glass simple pattern and you get to do the copper foil and soldering. This takes out some of the work and price, but you still get to do the hardest parts.

They gear the kits towards using a wood burning tool, like this one, and I used mine just like it at first too...but it does not get hot enough for a good solder.

It looks like smooshed tin foil in between the glass.

I will note that the soldering iron makes a HUGE difference.

However, the kits are a great alternative if you don't want to invest in all the tools but just want one project to try.

You can find them at JoAnn (not affiliated)

My Stained Glass History

I began my stained glass hobby back in May 2023.

I've done dozens of projects and I'm progressively getting better. I have so many ideas--I just need more time!

If you'd like to purchase my past projects, they are in my Etsy shop here, they look amazing in direct sunlight.

I'm going to go through the steps of making a monstera leaf sun catcher. I've got video and all the tips and tricks I learned along the way.

If you have other tips for me, please leave them in the comments!

My Stained Glass History I began my stained glass hobby back in May 2023. I've done 11 projects and I'm progressively getting better. I have so many ideas--I just need more time! If you'd like to purchase one, they are in my Etsy shop here. I'm going to go through the steps of making a monstera leaf sun catcher. I've got video and all the tips and tricks I learned along the way. If you have other tips for me, please leave them in the comments!

Supplies Needed for Monstera Leaf Stained Glass Sun Catcher:

affiliate links, I get a small commission if you purchase through my links

Patina's in black and copper are also available if you want to change the color of the solder, however, patina steps are not included in this post.

Okay, let's get started!

Supplies Needed for Monstera Leaf Stained Glass Sun Catcher: Glass in Various Colors Glass Cutter (love this kit) Glass Cutting Oil Glass Running and Nipping Pliers Glass Pliers (again, love this kit) Glass Grinding Machine Copper Foil Stained Glass Soldering Iron Heat Resistant Work Surface Pins Flux and Brush Lead/Tin Solder Wire Hanging Chain Jewelry Pliers Elastic Bandage Monstera Leaf Pattern Safety Glasses Marker Okay, let's get started!

Step 1: Pattern

First step, begin by printing off your pattern. (link for this one here)

You can do whatever design you want to do, but for this tutorial I will only be referencing this specific monstera leaf.

I used this monstera leaf and then just drew on the sections where the different glass colors would be.

Step 1: Pattern Begin by printing off your pattern. (link for this one here) You can do whatever design you want to do, but for this tutorial I will only be referencing this specific monstera leaf. I used this monstera leaf and then just drew on the sections where the different glass colors would be.

Print off 2 copies of the monstera leaf.

Number them both identically.

Cut out one of them into individual piece, leave the other one whole as a reference when piecing back together.

*Note: I think my marker lines are thick and this can cause a big gap in the glass if I'm not cutting them all exactly the same way.

No doubt, there is a better way to do this, but thankfully this pattern is pretty simple.

Print off 2 copies of the monstera leaf. Number them both identically. Cut out one of them into individual piece, leave the other one whole as a reference when piecing back together. *Note: I think my marker lines are thick and this can cause a big gap in the glass if I'm not cutting them all exactly the same way. No doubt, there is a better way to do this, but thankfully this pattern is pretty simple.

Step 2: Glass

Oh ya, this is glass--and sadly, it gets everywhere!

I got lots of micro cuts on my fingers, and did not want to wear gloves--and lose my dexterity.

A friend of mine suggested wrapping parts of my fingers that touch the glass with elastic bandage pieces.

This is genius!

Just a small wrap around each finger will save your skin and make it so you can continue this new fun hobby!

*Also, be prepared to carefully clean your work area every session. Wipe down table/desk and sweep or vacuum floors.

Step 2: Glass Oh ya, this is glass--and sadly, it gets everywhere! I got lots of micro cuts on my fingers, and did not want to wear gloves--and lose my dexterity. A friend of mine suggested wrapping parts of my fingers that touch the glass with elastic bandage pieces. This is genius! Just a small wrap around each finger will save your skin and make it so you can continue this new fun hobby! *Also, be prepared to carefully clean your work area every session. Wipe down table/desk and sweep or vacuum floors.

Begin by tracing your pattern onto the desired piece of glass.

I made 3 of these at a time, so you'll see me doing things in triplicate.

It can be tricky to do angled cuts or anything but a straight line on the glass...at least as a beginner.

So I did three of the same piece and lined the metal ruler on the edge of them.

The ruler and the glass cutter work hand in hand, but there's a distance between where the edge of the ruler is and where the glass cutter actually cuts...so through some trial and error, I got to where I was getting that cut line exactly where I wanted it.

It can be tricky to do angled cuts or anything but a straight line on the glass...at least as a beginner. So I did three of the same piece and lined the metal ruler on the edge of them. The ruler and the glass cutter work hand in hand, but there's a distance between where the edge of the ruler is and where the glass cutter actually cuts...so through some trial and error, I got to where I was getting that cut line exactly where I wanted it.

Score the line firmly but not hard along the ruler edge on the glass.

Some people just pop the glass along the score line with their hands, but I prefer the nipping pliers for now.

Line the nipping pliers so the white line is oriented with the score line on the glass and press gently to get the glass to break along the line.

At least as a beginner, there's still a possibility of it not breaking completely along the line, shards of glass chipping out or a completely wrong break.

Be patient as you learn this new skill.

...

Cut each of the pattern pieces.

Use small straight snippets of multiple cuts to make the curves along the leaves.

Line the nipping pliers so the white line is oriented with the score line on the glass and press gently to get the glass to break along the line. At least as a beginner, there's still a possibility of it not breaking completely along the line, shards of glass chipping out or a completely wrong break. Be patient as you learn this new skill. ... Cut each of the pattern pieces. Use small straight snippets of multiple cuts to make the curves along the leaves.

Step 3: Grinding

My first couple of stained glass sun catcher projects, I did not use a glass grinder.

Some of the edges were rough, chipped or didn't quite fit together, so I was putting all the pressure of making a good finished project on the copper foil and solder.

They couldn't line up tightly because of the uneven edges.

So I knew that getting this glass grinder was a must.

If you want your stained glass project to turn out its best, this is the key.

Step 3: Grinding My first couple of stained glass sun catcher projects, I did not use a glass grinder. Some of the edges were rough, chipped or didn't quite fit together, so I was putting all the pressure of making a good finished project on the copper foil and solder. They couldn't line up tightly because of the uneven edges. So I knew that getting this glass grinder was a must. If you want your stained glass project to turn out its best, this is the key.

The glass grinder is small and portable.

I used mine outside on the patio near our rock garden, it could be used inside in a studio, but there is some splattering.

You fill the basin with water and then turn it on.

The grinding bit rotates, like a router on a router table, so you can smooth out all the edges and make the pieces fit together perfectly.

Work one piece at a time and set it down.

Then do the next piece and fit it perfectly to the first piece and so on.

The glass grinder worked surprising fast.

Still time consuming.

Grinding all the pieces for one monstera leaf took me 20 minutes.

The machine is easy to clean out and most of the glass turns into a "ceramic paste" that can be easily cleaned out.

The glass grinder is small and portable. I used mine outside on the patio near our rock garden, it could be used inside in a studio, but there is some splattering. You fill the basin with water and then turn it on. The grinding bit rotates, like a router on a router table, so you can smooth out all the edges and make the pieces fit together perfectly. Work one piece at a time and set it down. Then do the next piece and fit it perfectly to the first piece and so on. The glass grinder worked surprising fast. Still time consuming. Grinding all the pieces for one monstera leaf took me 20 minutes. The machine is easy to clean out and most of the glass turns into a "ceramic paste" that can be easily cleaned out.

Again, line up the pieces and make sure they match up well.

The grinder makes the curves and holes possible, where I'd never be able to cut them that cleanly with the glass cutter.

Glass Grinding BEFORE and AFTER:

Here you can see the difference the Glass Grinding Machine makes.

I cut pretty good for a beginner, but it needed those edges cleaned up in order to fit together cleanly.

Step 4: Copper Foiling

After your glass monstera leaf pieces are cut and smoothed with the glass grinding machine, it's time to copper foil the edges of all the pieces.

This process is also referred to as Tiffany Glass.

Step 4: Copper Foiling After your glass monstera leaf pieces are cut and smoothed with the glass grinding machine, it's time to copper foil the edges of all the pieces.

Peel off a little of the backing from the copper foil.

Place the copper foil sticky side up on the table while you place the edge of the glass right on the center of the foil.

It's important to get it as centered as possible.

The copper foil will stick to the edges of the glass and fold over both sides "hopefully" equally.

Peel off a little of the backing from the copper foil. Place the copper foil sticky side up on the table while you place the edge of the glass right on the center of the foil. It's important to get it as centered as possible. The copper foil will stick to the edges of the glass and fold over both sides "hopefully" equally.

Some people use burnishers to make sure the copper foil is firmly on the glass.

I gently rubbed it on my work table to press all the edges, corners and sides down firmly.

Step 5: Flux and Solder Pieces

Soldering is next.

It is by far the funnest and most difficult part for me. My soldering is still bumpy and not as smooth as some others I see on instagram. I asked someone how their soldering was so smooth and she said "years and years of practice"...so big learning curve here.

Solder is part lead and part tin. It's super soft metal and melts so fast.

As I mentioned earlier in the post, the soldering iron is super important.

This does not work well with a wood burner...trust me, I tried it and it looked like smooshed aluminum foil between the glass.

The soldering iron gets hot and has a large tip that will let you work the solder fast onto the copper foil.

Step 5: Flux and Solder Pieces Soldering is next. It is by far the funnest and most difficult part for me. My soldering is still bumpy and not as smooth as some others I see on instagram. I asked someone how their soldering was so smooth and she said "years and years of practice"...so big learning curve here. Solder is part lead and part tin. It's super soft metal and melts so fast. As I mentioned earlier in the post, the soldering iron is super important. This does not work well with a wood burner...trust me, I tried it and it looked like smooshed aluminum foil between the glass. The soldering iron gets hot and has a large tip that will let you work the solder fast onto the copper foil.

Okay next, set your stained glass monstera leaf pieces on your fire resistant surface.

Open up the flux and pour some of the solution into the cap.

Dip the flux brush into the cap and brush it on all the pieces, right on the copper foil.

Unroll about 6 inches of the solder stick from the roll.

Then touch the soldering iron to the solder briefly and then rub the soldering iron on the edge of the glass pieces.

The solder goes pretty far and needs just a light coating over all the copper foil--this will make it easier for all those holes and curves in the leaf.

Okay, set your stained glass monstera leaf pieces on your fire resistant surface. Open up the flux and pour some of the solution into the cap. Dip the flux brush into the cap and brush it on all the pieces, right on the copper foil. Then touch the soldering iron to the solder briefly and then rub the soldering iron on the edge of the glass pieces. The solder goes pretty far and needs just a light coating over all the copper foil--this will make it easier for all those holes and curves in the leaf.

Do the front side and the backside of each piece.

Then carefully hold the glass pieces and carefully do the edges.

These will be much harder to do later, so it's important to coat all the little pieces now.

Step 5: Flux and Solder Leaf

After all the pieces have cooled down, pin them in place on the heat proof board with sewing pins.

Then brush flux on all the seams--where 2 pieces or more of glass come together.

Touch the soldering iron to the solder and tap it on the seams to "tack" all the leaf pieces together into one piece.

Repeat this same process on the backside of the glass leaf.

Now to make the solder look pretty and all connected:

Hold the solder in your non-dominate hand and the soldering iron in your dominate hand.

Unwrap about 6 inches of solder from the reel.

Start on the bottom vein of the monstera leaf and gently touch the solder to the soldering iron.

Move the soldering iron slowly along the solder from tacking in place earlier.

This will melt the solder underneath and lay a "bead" of solder over the top of the seam, making it look amazing. Repeat this front and back. Then smooth out the solder around the edges.

Again, there is a big learning curve here. Practicing adds up the cost for sure, but it's fun to look back and see how much you are improving!

Start on the bottom vein of the monstera leaf and gently touch the solder to the soldering iron. Move the soldering iron slowly along the solder from tacking in place earlier. This will melt the solder underneath and lay a "bead" of solder over the top of the seam, making it look amazing. Repeat this front and back. Then smooth out the solder around the edges. Again, there is a big learning curve here. Practicing adds up the cost for sure, but it's fun to look back and see how much you are improving!

Step 6: Hanging Loops

Now use the jewelry pliers and wire to make little loops for hanging.

I wrap my wire around a pen like a spring and then cut the wire, so the loops are the same size.

Find something, like a tin lid, to rest the wire loops on while soldering them to the monstera leaf.

Have your pliers on hand in case you need to adjust, but don't use your fingers...that little loop will be hot!

Brush on some flux, touch the soldering iron to the solder to pick up just a little bit of the metal and then touch it on the wire loops.

Repeat until it has enough solder to hold it firmly in place.

Then clean up any rough spots with the soldering iron and then go over all the solder lines with the finest steel wool to remove any burrs or unevenness.

This steel wool cleaning is the best way to make sure those solder lines look amazing...do not scrub it aggressively in every direction, as it can lift the copper foil right off the glass if not careful.

Now: Take your finished stained glass monstera leaf to the sink. Use dish soap or glass cleaner and a toothbrush to clean the glass and the solder, removing any flux residue and making it look shiny and clean.

Brush on some flux, touch the soldering iron to the solder to pick up just a little bit of the metal and then touch it on the wire loops. Repeat until it has enough solder to hold it firmly in place. Then clean up any rough spots with the soldering iron. Now: Take your finished stained glass monstera leaf to the sink. Use dish soap and a toothbrush to clean the glass and the solder, removing any flux residue and making it look shiny and clean.

Step 7: Chain

Use the jewelry pliers to attach some chain to the loops.

I measured out 15 inches of chain and attached either side to the loop.

It's the perfect length to hang in my window inside and still see plenty outside.

I'm so happy! It was a lot of work to make this copper foil stained glass monstera leaf sun catcher--but totally worth it.

It makes me so happy every day when I see it sparkling in the kitchen window.

Step 7: Chain Use the jewelry pliers to attach some chain to the loops. I measured out 15 inches of chain and attached either side to the loop. It's the perfect length to hang in my window inside and still see plenty outside. I'm so happy! It was a lot of work to make this copper foil stained glass monstera leaf sun catcher--but totally worth it. It makes me so happy every day when I see it sparkling in the kitchen window.

Phew, that's it!

Lots of love and work goes into handcrafting gorgeous things.

Stained glass is a new favorite craft of mine.

It is time consuming...this single beautiful monstera leaf took me about 4 hours of time to finish.

The set up is a big investment at first...then it's just buying consumables like glass and solder, which are still pricier than buying a tee shirt and vinyl, but it is a really fun new hobby.

What do you think?

Will you start doing stained glass sun catchers too?

Like, Pin and Share!

Lots of love and work goes into handcrafting gorgeous things. Stained glass is a new favorite craft of mine. It is time consuming...this single beautiful monstera leaf took me about 4 hours of time to finish. The set up is a big investment at first...then it's just buying consumables like glass and solder, which are still pricier than buying a tee shirt and vinyl, but it is a really fun new hobby. What do you think? Will you start doing stained glass sun catchers too?

Check out these other stained glass and faux glass tutorials you might love!

If doing real stained glass sun catchers isn't quite what you had in mind, here are some other suncatcher, window clings and simple craft ideas.

It's not making "faux stained glass" with crayons, wax paper and black glue, permanent marker or black acrylic paint...these are still high quality crafts for an older audience, likely teens and up.

How to Make Fragment Effects Stained Glass Suncatcher

Learn how to make fragment effects stained glass suncatcher with a fun crystal snowflake on clear plastic hexagon hanger with small hole for hanging.

Plaid Crafts doesn't just make acrylic paints, they have lines of other fun products, one of the most recent is Fragment Effects stained glass chips...better than a glass bead suncatcher.

There's a special adhesive and a variety of blanks to work with to create beautiful geode-like creations. (check out this post: Geode Glass Art)

This gorgeous crystalline suncatcher is a perfect craft and a great way to stay busy and creative over Winter break! I love continuing the snowflake theme into January and this looks fantastic dangling in the window and letting light pass through it like a stained glass sun catcher.

How to Make Corelle Plate Necklace Jewelry DIY

Learn how to transform vintage, chipped or cracked plates and dishes into wearable jewelry, necklace pendants and more.

Did you have Corelle Butterfly Gold plates? They launched in 1970 and I think everyone I knew growing up had them. This was our family plate pattern.

Make nostalgic jewelry with old dinner plates using lead-free solder, great for handmade gifts too!

How to Make Stained Glass with Gallery Glass Paint

Learn how to make the perfect faux stained glass using Plaid's Gallery Glass and Gallery Glass Leading Sheets--say goodbye to wonky black outlines made with a shaky hand.

It's easy to create a diy suncatchers, glass frame or even add special elements to windows in your home using glass paints, and they can be hung with fishing line in a window.

Stained glass suncatchers are beautiful and popular, and Gallery Glass is a great alternative to the huge investment and skill it takes to cut and solder glass, find supplies at any major craft stores.

Faux Stained Glass Candy Dish!

Have you ever used faux stained glass paint? It is so much fun.

Plaid has Gallery Glass paint and leading that is perfect for crafting.

Transform a little vase or dish from the dollar store into a luminary with a battery operated tea light, you can glue a flat glass marble or two on the vase with E6000 clear glue too.